Performing A Single Wavelength Measurement - Hach DR 2800 User Manual

6.3.2 Performing a Single Wavelength Measurement

Setting the Concentration Factor
1. From the Options menu, press
. Select On to activate this feature.
OFF
2. Press the key and use the alphanumeric keypad to
FACTOR
enter the factor by which absorbance readings are to be
multiplied. Press the
concentration measurements or to create a new unit.
3. Press to confirm.
OK
Selecting the Concentration Resolution
1. From the Options menu, press
.
RESOLUTION
2. Select the resolution and press
1. Insert the blank cell into the cell holder. Press
Note: The key is only active after the zero measurement has
READ
been performed.
2. Insert the sample cell into the cell holder. Press
3. For data storage, see
Advanced Operations
CONCENTRATION FACTOR:
key to select the units for
UNIT
CONCENTRATION
.
OK
section 5.3.1 on page 28.
.
ZERO
.
READ
61