Air Spring Service; 200 Hour Service; Air Spring Removal - SRAM RockShox SEKTOR Service Manual

A i r S p r i n g S e r v i c e
2 0 0 H o u r S e r v i c e
The air spring assemblies pictured in this manual are 120 mm and 150 mm travel configurations. Refer to
Configurations for further details about Sektor air spring travel configurations.
Verify all pressure is removed from the fork before proceeding. Depress the Schrader valve again to remove any remaining air pressure. Failure to
do so can result in injury and/or damage to the fork.
Inspect each part for scratches. Do not scratch any sealing surfaces when
servicing your suspension. Scratches can cause leaks.
When replacing seals and o-rings, use your fingers or a pick to remove the
seal or o-ring. Spray RockShox® Suspension Cleaner or isopropyl alcohol on
each part and clean with a clean lint-free shop towel.
Apply SRAM® Butter grease to the new seals and o-rings.
Remove the air spring top cap.
1 1
Clean the upper tube threads.
Remove the top cap o-ring and discard it. Apply grease to a new o-ring
2
and install it.
A i r S p r i n g R e m o v a l
⚠ WARNI NG- EYE HAZARD
NOTI CE
Air Spring and All-Travel Spacer
SRAM Butter Grease
24 mm
18

Air Spring Service