Table of Contents
Advertisement
A i r S p r i n g S e r v i c e - D e b o n A i r +
A ZEB air spring assembly is pictured in this section. Procedures are the same for ZEB, Lyrik, and Pike unless otherwise described.
2 0 0 H o u r S e r v i c e
Verify all pressure is removed from the fork before proceeding. Depress the Schrader valve again to remove any remaining air pressure. Failure to
do so can result in injury and/or damage to the fork.
Inspect each part for scratches. Do not scratch any sealing surfaces when
servicing your suspension. Scratches can cause leaks.
When replacing seals and o-rings, use your fingers or a pick to remove the
seal or o-ring. Spray RockShox Suspension Cleaner or isopropyl alcohol
onto each part and clean with a clean lint-free shop towel.
Apply SRAM Butter Grease to the new seals and o-rings.
1
Remove the air spring top cap. Press down firmly when loosening the
Remove the air spring top cap. Press down firmly when loosening the
top cap.
top cap.
The fork top caps are tightened to a high torque value. Ensure
the fork is held securely in the bicycle stand. To avoid damage
to the top cap, press the top cap tool squarely and firmly down
when loosening. Use a socket wrench with a long handle for extra
leverage.
Clean the upper tube threads.
Clean the upper tube threads.
2
Remove the top cap o-ring and discard it.
Remove the top cap o-ring and discard it.
Apply grease to a new o-ring and install it.
Apply grease to a new o-ring and install it.
A i r S p r i n g R e m o v a l
⚠ WARN IN G - EYE HAZARD
NOTI CE
NOTI CE
SRAM Butter Grease
Top cap / Cassette tool
Air Spring Service - DebonAir+
22
Advertisement
Table of Contents
