Table of Contents
Advertisement
The F1U123 Bitronics DataSwitch has three DB25 ports for connecting to
the devices and/or computers. Depending on your application, the Bitronics
DataSwitch Kit can be used in two different ways:
a)
One PC to two parallel port devices
b)
Two PCs to one parallel port device
Please refer to the figure below for your application. Note that the included
F2A047-06 cable can be used in any instance shown below.
F2A047-XX Cable
Parallel
(One F2A047-06
Printer
F2A046-XX
a) One PC to two parallel port devices
The Bitronics DataSwitch has two buttons on top shaped like arrows. When
depressed, these buttons instantly "connect" the middle DB25 port (common)
to the port adjacent to the button. An LED next to the button indicates which
port is currently active.
To select Port A, firmly depress the button next to
port A until the LED next to the button illuminates.
The connection between Port A and the
common port will remain active until
Port B is selected.
Hardware Installation
Parallel
Port Camera
Included)
Existing Cable
PC
PC
F2A047-XX
(One F2A047-06 included)
b) Two PCs to one parallel port device
Usage
2
PC
F2A047-XX
(One F2A047-06 included)
F2A046-XX
Parallel Printer
Advertisement
Table of Contents
