Wall Fixing And Anti-Tip Device; Tools Needed For Installation Of Anti-Tipdevice; Instruction For Wall Fixing - Smeg A1CXU6 Instruction Manual

Smeg range instruction manual

Table of Contents

4. WALL FIXING AND ANTI-TIP DEVICE

WARNING

CAUTION: PROPERTY DAMAGE

Contact a qualified installer or contractor to determine the proper method fro drilling holes through the

wall or floor material (such as ceramic tile, hardwood, etc.)

Failure to follow these instructions may result in damage to wall or floor coverings.

Ruler or tape mesurer

Philips screwdriver

Pliers

Protection eyer glasses

1 Fix the screw to the wall and hook the chain (Fig. A);

2 Hook the chain to the hole positioned at the rear of the cooker (Fig. B – Part. A);

3 Once the chain is in position, push the cooker against the wall;

4 The height of the screw hole from floor level must not exceed 315" - 800 mm (Fig. C).

Instructions for the Installer

All ranges can tip

Injury to persons could result

Install anti-tip device packed with the range

See installation instructions

FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN DEATH OR

SERIOUS BURNS TO CHILDREN OR ADULTS.

ELECTRIC SHOCK HAZARD

Use extreme caution when drilling holes into the wall or floor. There may be

concealed electrical wires located behind the wall or under the floor.

Identify the electrical circuits that could be affected by the installation of the

Anti-Tip Device, then turn off power to these circuits.

Failure to follow these instructions may result in electrcal shock or other

personal injury.

Flat blade screwdriver

Gloves

3/8" Rachet

Wrench

Table of Contents