SMC Networks SMC8624/48T Management Manual page 186

C
ONFIGURING THE
CLI – This displays STA settings for instance 0, followed by settings for
each port. The settings for instance 0 are global settings that apply to the
IST (page 3-117), the settings for other instances only apply to the local
spanning tree.
Console#show spanning-tree mst 0
Spanning-tree information
---------------------------------------------------------------
Spanning tree mode
Spanning tree enable/disable
Instance
Vlans configuration
Priority
Bridge Hello Time (sec.)
Bridge Max Age (sec.)
Bridge Forward Delay (sec.)
Root Hello Time (sec.)
Root Max Age (sec.)
Root Forward Delay (sec.)
Max hops
Remaining hops
Designated Root
Current root port
Current root cost
Number of topology changes
Last topology changes time (sec.):645
Transmission limit
Path Cost Method
---------------------------------------------------------------
Eth 1/ 1 information
---------------------------------------------------------------
Admin status
Role
State
External path cost
Internal path cost
Priority
Designated cost
Designated port
Designated root
Designated bridge
Fast forwarding
Forward transitions
Admin edge port
Oper edge port
Admin Link type
Oper Link type
Spanning Tree Status : enable
.
.
.
3-138
S
WITCH
: enable
: root
: forwarding
: 100000
: 100000
: 128
: 200000
: 128.24
: 32768.0.0000ABCD0000
: 32768.0.0030F1552000
: disable
: 1
: enable
: disable
: auto
: point-to-point
:MSTP
:enable
:0
:1-4094
:32768
:2
:20
:15
:2
:20
:15
:20
:20
:32768.0.0000ABCD0000
:1
:200000
:1
:3
:long
3-228