Configuring Port Authorization Mode; Figure 3-24. 802.1X Configuration - SMC Networks SMC8624/48T Management Manual

C
ONFIGURING THE
Web – Select Security, 802.1x, Configuration. Enable dot1x globally for the
switch, modify any of the parameters required, and then click Apply.
CLI – This enables re-authentication and sets all of the global parameters
for 802.1x.
Console(config)#dot1x re-authentication
Console(config)#dot1x max-req 5
Console(config)#dot1x timeout quiet-period 40
Console(config)#dot1x timeout re-auth 5
Console(config)#dot1x timeout tx-period 40
Console(config)#authentication dot1x default radius
Console(config)#

Configuring Port Authorization Mode

When dot1x is enabled, you need to specify the dot1x authentication mode
configured for each port.
Command Attributes
• Status – Indicates if authentication is enabled or disabled on the port.
• Operation Mode – Allows single or multiple hosts (clients) to connect
to an 802.1X-authorized port. (Range: Single-Host, Multi-Host;
Default: Single-Host)
3-56
S
WITCH

Figure 3-24. 802.1x Configuration

3-109
3-106
3-109
3-110
3-110
3-106