Default-Gateway - SMC Networks SMC6724L3 Management Manual

Tigerswitch 10/100 24-port layer 3 switch
Hide thumbs Also See for SMC6724L3:
Table of Contents

Advertisement

Default Setting
7200 seconds
Command Mode
Router Configuration
Command Usage
This command sets the prune state lifetime. After the prune state
expires, the router will resume flooding multicast traffic from the
multicast source device.
Example
Console(config-router)#prune-lifetime 5000
Console(config-router)#

default-gateway

Use this command to specify the default DVMRP gateway for IP multicast
traffic. Use the no form to remove the default gateway.
Syntax
default-gateway ip-address
no default-gateway
ip-address - IP address of the default DVMRP gateway.
Default Setting
None
Command Mode
Router Configuration
Command Usage
• The specified interface advertises itself as a default route to
neighboring DVMRP routers. It advertises the default route out
through its other interfaces. Neighboring routers on the other
interfaces return Poison Reverse messages for the default route back
M
R
ULTICAST
OUTING
C
OMMANDS
4-295

Advertisement

Table of Contents
loading

Table of Contents