Sta Port Configuration - SMC Networks SMC8606T Management Manual

W I
EB NTERFACE

STA Port Configuration

The following figure and table describe STA configuration for ports.
Parameter
Fast forwarding
mode
Priority
3-30
Default Description
DISABLED Allows you to enable or disable fast
forwarding for all ports on the switch.
128 Defines the priority for the use of a port in the
STA algorithm. If the path cost for all ports on
a switch are the same, the port with the
highest priority (i.e., lowest value) will be
configured as an active link in the spanning
tree. Where more than one port is assigned the
highest priority, the port with lowest numeric
identifier will be enabled.
The range is 0 - 255.