Table of Contents
Advertisement
Quality of Service Configuration (qos)
The QoS configuration commands include the following items
QoS Commands
enable qdlyb <1~255>
Enables the delay bound for the low-priority queue, and sets the bound. (Range:1-255 ms)
disable qdlyb
Disables the delay bound for the low-priority queue.
config qos [fcfs|strict|wrr] <high weight:1~7> <low weight:1~7>
Sets the service method for priority traffic, and the service ratio for weighted round-robin.
fcfs – First-come first-serve; i.e., no priority service.
strict – All packets in the high-priority queue before any packets in the low-priority queue.
wrr – Weighted round-robin.
high weight – Number of high-priority packets sent before servicing the low-priority
low weight – Number of low-priority packets sent before returning to service the
config qospolicy <high level-list 0~7>
Configures the priority tags that are mapped to the high-priority queue.
show qos
Displays the QoS configuration.
IGMP Snooping Configuration (igmp)
The IGMP Snooping configuration commands include the following items
IGMP Snooping Commands
enable igmp
Enables IGMP snooping.
disable igmp
Disables IGMP snooping.
show igmpstate
Shows whether IGMP snooping is enabled or disabled.
Q
queue.
high-priority queue.
S
UALITY OF
ERVICE
C
ONFIGURATION
.
(
)
QOS
.
5-11
Advertisement
Table of Contents
