Fiat 500 ABARTH CABRIO 2018 User Manual page 68

Table of Contents

Advertisement

Customer Action
6. Place turn signal in neutral state.
7. Turn right turn signal switch ON.
8. Place turn signal in neutral state.
9. Turn left turn signal switch ON.
10. Turn left turn signal switch OFF. (Turn Signal Switch Must be placed in
Neutral State).
11. Turn ignition STOP/OFF/LOCK.
12. Turn ignition MAR/ACC/ON/RUN. (Entire sequence needs to be com-
pleted within one minute or sequence will need to be repeated).
Turn hazard flashers OFF (Manually).
If a reset procedure step is not completed within
60 seconds, then the turn signal lights will blink
and the reset procedure must be performed
again in order to be successful.
66
NOTE:
Each step MUST BE held for at least two seconds
Right turn light BLINKS.
Left turn light is OFF.
Right turn light is ON SOLID.
Left turn light BLINKS.
Right turn light is OFF.
Left turn light BLINKS.
Right turn light is ON SOLID.
Left turn light is ON SOLID.
Right turn light is OFF.
Left turn light is OFF.
System is now reset and the engine may be started.
Maintaining Your Air Bag System
WARNING!
• Modifications to any part of the air bag
system could cause it to fail when you need
it.You could be injured if the air bag system
is not there to protect you. Do not modify
Customer Will See
WARNING!
the components or wiring, including adding
any kind of badges or stickers to the steering
wheel hub trim cover or the upper passen-
ger side of the instrument panel. Do not
modify the front bumper, vehicle body

Advertisement

Table of Contents
loading

This manual is also suitable for:

500 abarth 2018

Table of Contents