Table of Contents
Advertisement
Control Descriptions
Icon
A/C Button
Push and release to change the current setting, the indicator illuminates when A/C is ON. Performing this function again will cause
the A/C operation to switch into manual mode and the A/C indicator will turn off.
Recirculation Button
Push and release this button on the touchscreen, or push the button on the faceplate, to change the system between recirculation
mode and outside air mode. Recirculation can be used when outside conditions, such as smoke, odors, dust, or high humidity are
present. Recirculation can be used in all modes. Recirculation may be unavailable if conditions exist that could create fogging on
the inside of the windshield. The A/C can be deselected manually without disturbing the mode control selection. Continuous use
of the Recirculation mode may make the inside air stuffy and window fogging may occur. Extended use of this mode is not rec-
ommended.
AUTO Button
Automatically controls the interior cabin temperature by adjusting airflow distribution and amount. Performing this function will
cause the system to switch between manual mode and automatic modes. Refer to "Automatic Operation" in this section for more
information.
Front Defrost Button
Push and release to change the current airflow setting to Defrost mode. The indicator illuminates when this feature is ON. Air
comes from the windshield and side window demist outlets. When the defrost button is selected, the blower level will increase.
Use Defrost mode with maximum temperature settings for best windshield and side window defrosting and defogging. Performing
this function will cause the ATC to switch into manual mode. If the front defrost mode is turned off then the climate system re-
turns the previous setting.
20
Description
Advertisement
Chapters
Table of Contents
