Viewing, Modifying, And Deleting Address Pools - SMC Networks Barricade SMC7401BRA User Manual

Configuring Dynamic Host Configuration Protocol
4. When you are done defining the pool, click [Submit]. A
[Confirmation] page displays briefly to indicate that the pool
has been added successfully. After a few seconds, the [DHCP
Server Pool – Add] page appears with the newly added pool.
5. Follow the instructions in Setting the [DHCP Mode] to enable
the DHCP Server.

Viewing, modifying, and deleting address pools

To view, modify, or delete an existing address pool, display
the DHCP Server Configuration page, and click the icons
in the corresponding row in the address pool table.
•
To delete an IP address pool, click
and [Commit] your changes.
•
To view details on an IP address pool, click
appears with the same information that you entered when
you added the pool.
•
To modify the pool, click
Modify] page appears, as shown in Figure 12:
56
Figure 12. DHCP Server Pool - Modify Page
, then [Submit]
. The [DHCP Server Pool –
. A page