SMC Networks Barricade SMC7401BRA User Manual page 146

Security This is the security level that must be enabled globally for this rule
Level: to take affect. A rule will be active only if its security level is the
same as the globally configured setting (shown on the main
[IP Filter] page). For example, if the rule is set to [Medium] and the
global firewall level is set to [Medium], then the rule will be active;
but if the global firewall level is set to [High] or [Low], then the rule
will be inactive.
Blacklist This field specifies whether or not a violation of this rule will result
Status: in the offending computer's IP address being added to the
Blacklist, which blocks the ADSL Barricade from forwarding
packets from that source for a specified period of time. See
Configuring Firewall Settings on page 135 for instructions.
Log Tag: This is a description of up to 16 characters to be recorded in the
log in the event that a packet violates this rule. Be sure to set the
[Log Option] to [Enable] if you configure a Log Tag.
Start Time The time range during which this rule is to be effective, specified
(HH MM SS): in military units.
End Time
(HH MM SS):
Configuring IP Filters
145