Network Service Detection - SMC Networks SMC Barricade SMCBR24Q User Manual

Remove the Connection: This WAN Interface will be suspended when the network connection to ISP is not
active. The traffic on this WAN will be dispatched to the other WAN port. Once connection to ISP is
re-established, the traffic will be dispatched back.
If you enable NSD, you have to choose at least one option from following four items.
Default Gateway: If you check this item, the Router will ping the default gateway first.
ISP Host: After pinging Default Gateway, the Router will ping ISP Host "Retry timeout" later. The ISP Host
is provided by ISP.
Remote Host: Enter the IP address of Remote Host that you're going to ping.
DNS Lookup Host: Enter the Host Name or Domain Name that you're going to ping.
If Load Balance (Auto) is selected, it will be automatically computing the max. bandwidth of WAN1 and
WAN2 by using Weighted Round Robin to balance the loading.

Network Service Detection

This tool can detect the network connection status of ISP by pinging Default Gateway, ISP Host, Remote
Host or DNS Lookup Host.
Retry count: The count of ping. The default is 5.
SMCBR24Q User Manual
Page 77