SMC Networks SMC Barricade SMC7004VWBR User Manual page 38

A S
DVANCED ETUP
Password Settings
Use this menu to restrict access based on a password. By default, there is
no password. For security you should assign one before exposing the
Wireless Barricade to the Internet.
Passwords can contain from 3–12 alphanumeric characters and are not
case sensitive.
If your password is lost, or you cannot gain access to the user interface,
press the Reset button on the rear panel (holding it down for at least five
seconds) to restore the factory defaults (default is no password).
4-10