Configuring Your Macintosh Computer - SMC Networks SMC Barricade SMC7004VWBR User Manual

3. Type "IPCONFIG /RENEW" and press the <ENTER> key. Verify
that your IP Address is now 192.168.2.xxx, your Subnet Mask is
255.255.255.0 and your Default Gateway is 192.168.2.1. These values
confirm that the Wireless Barricade is functioning.
4. Type "EXIT" and press <ENTER> to close the "Command Prompt"
window.

Configuring Your Macintosh Computer

You may find that the instructions here do not exactly match your screen.
This is because these steps and screenshots were created using Mac OS
8.5. Mac OS 7.x and above are all very similar, but may not be identical to
Mac OS 8.5.
Step 1. Configure TCP/IP Settings
After you have completed the hardware setup, you need to configure your
computer to connect to the Wireless Barricade. You need to determine
how your ISP issues your IP address. Many ISPs issue these numbers
automatically using a networking technology known as Dynamic Host
Configuration Protocol, or DHCP. Other ISPs will specify your IP address
and associated numbers, which you must enter manually. This is also
known as a static IP address. How your ISP assigns your IP address
determines how you will configure your computer.
C C
ONFIGURING
TCP/IP
LIENT
5-35