SMC Networks SMC Barricade SMC7004VWBR User Manual page 113

Symptom
Management Problems
Cannot connect using
the web browser
Forgot or lost the
password
Printer Server
The printer cannot print,
or prints garbage
Troubleshooting Chart
• Be sure to have configured the Wireless Barricade with
a valid IP address, subnet mask, and default gateway.
• Check that you have a valid network connection to the
Wireless Barricade and that the port you are using has
not been disabled.
• Check the network cabling between the management
station and the Wireless Barricade.
• Press the Reset button on the front panel (holding it
down for at least five seconds) to restore the factory
defaults.
• Make sure the parallel cable between the Wireless
Barricade and printer is connected and is in good
condition
T
ROUBLESHOOTING
Action
A-3