Canceling A Print Job; Making Copies Of The Last Printout; Feeding Paper; Adjusting The Contrast And Brightness - Sony UP-X898MD Instructions For Use Manual

• When cutting using the lower paper cutter, the paper
may not be cut cleanly if holding the center of the front
edge of the paper.

Canceling a Print Job

To cancel a print job in progress, press the OPEN button
or the FEED button.

Making Copies of the Last Printout

Press the COPY button. The unit makes a copy of the
last printout. The image of the last printout is retained in
the unit's memory until you make a printout of another
image or turn the power off. You can make only one
copy regardless of the print quantity set using the menu.
Notes
• If you press the COPY button immediately after
turning the power on, the alarm buzzer will sound as
nothing is stored in memory.
• Turning off the power of the printer will cause the
image stored in memory to be lost.
To make multiple copies of the same printout
Press the COPY button as many times as necessary
(maximum 20 copies including the first printout) while
copying the first printout. Each time you press the
COPY button, a short buzzer sounds.
Note
The number of printouts printed by pressing the PRINT
button is also included in the maximum number. For
example, if you press the COPY button after you pressed
the PRINT button five times and made five printouts, the
number of multiple copies of the same printout becomes
15.
To interrupt copying
Press the OPEN or FEED button while copying.
To make copies in different directions and sizes
You can copy the video image stored last in a different
direction and size. Before pressing the COPY button,
select the printing direction and size. (page 27)

Feeding Paper

To feed paper, press the FEED button. The unit will
continue to feed paper as long as you hold down the
FEED button. Do not attempt to pull paper out of the
unit with your hand.
Adjusting the Contrast and
Brightness
You can adjust the contrast and brightness of the unit
using the CONTRAST control and BRIGHT control.
To adjust the contrast
You can adjust the contrast of printouts using the
CONTRAST control.
To make the contrast stronger: Turn the CONTRAST
control clockwise. Maximum is 64.
To make the contrast weaker: Turn the CONTRAST
control counterclockwise. Minimum is -64.
Note
The contrast adjusting function is equivalent to "Light"
of the density control provided with the printer driver.
The value adjusted by using the CONTRAST control is
added to the value already set as "Light."
To adjust the brightness
You can adjust the brightness of printouts using the
BRIGHT control.
To make the image brighter: Turn the BRIGHT
control clockwise. Maximum is 64.
To make the image darker: Turn the BRIGHT control
counterclockwise. Minimum is -64.
To lock control
You can lock the CONTRAST control and BRIGHT
control to prevent accidentally changing the setting by
turning the controls.
To lock: Push and hold the menu lever for about three
seconds. "LOCK" is displayed on the LCD, and the
value does not change even when the control is turned.
To unlock: Push and hold the menu lever again.
"UNLOCK" is displayed on the LCD, and the lock is
canceled.
29
Printing