Table of Contents
Advertisement
SSL Certificate Signing Request
Note: If you destroy the CSR on the RIPC, there is no way to get it back! If you
delete it by mistake, repeat the three steps.
Settings & Configuration Network
Parameter
IP address
Subnet mask
Gateway IP address
1. DNS Server IP
2. DNS Server IP
Enable Power
Management Unit
(Note: Changing the network settings of the RIPC might result in lost connections.
If you change the settings remotely, be sure all the values are correct so that you
will still be able to access the RIPC.)
SECURITY
Network Settings Parameters
Description
IP address in the usual dot notation.
The net mask of the local network.
The gateway of the network.
IP address of the primary Domain Name Server in dot notation. This
option may be left empty, however, the RIPC won't be able to perform
name resolution.
IP address of the secondary Domain Name Server in dot notation. It
will be used in case the Primary DNS Server can't be contacted.
If this option is enabled, access over the Power Management Unit is
possible. For this reason, to ensure the best level of security, we
recommend you disable this parameter.
27
Advertisement
Table of Contents
