Log Out From The Ripc; Control Host Remote Access - Belkin F1DE101G User Manual

USING YOUR RIPC

Log Out from the RIPC

This link logs out the current user and presents a new login screen. An
automatic logout will occur if there is no admin activity for a period of 30
minutes—following a prompt for re-entry of the password.

Control Host Remote Access

The Remote Access is the redirected screen, keyboard, and mouse of the
remote host system the RIPC controls.
Initiating Remote Access causes a pop-up window to appear that replicates the
screen of your host system. Remote Access will perform in much the same way
from a remote location as if you were sitting directly in front of the computer
itself. You will be able to use the keyboard and mouse in the usual way,
however, the remote system will react to keyboard and mouse actions with a
slight delay. The length of the delay depends on the bandwidth of the line over
which you are connected to the RIPC.
Remote Access Window Showing a Windows 2000 Desktop Screen
Note: You can circumvent communication issues between the local and remote
keyboards by adjusting the keyboard of your remote system to the same mapping as
that of your local one.
For example, if you are using a German administration system but your host
system uses a U.S. English keyboard layout, special keys on the German
keyboard will no longer function according to the local program, but will
recreate that of their U.S. English counterpart.
The Remote Access Java applet tries to establish its own TCP connection to the
RIPC. Its protocol is not HTTP or HTTPS, but another protocol called RFB
(Remote Frame Buffer Protocol). Currently RFB tries to establish a connection
to port number 443. Your local network environment must allow this
18