VTech SIP Cordless Series Master User Manual page 55

Appendix
Troubleshooting
The telephone does not ring when there is an incoming call.
•
•
•
•
•
installing your phone as far away as possible from these types of electronic devices
•
•
Remove and install the battery again and place the cordless
Cordless handset beeps and is not performing normally.
•
• Move the cordless handset closer to the telephone base or adjust the setting of RF transmission power (refer to
System Administration Guide for details
•
•
installing your phone as far away as possible from these types of electronic devices
There is interference during a telephone conversation or the call fades in and out when I am using the cordless handset.
• Move the handset closer to the telephone base or adjust the setting of RF transmission power (refer to
Administration Guide for details
•
•
installing your phone as far away as possible from these types of electronic devices
• If your telephone is plugged in with a modem or a surge protector, plug the telephone (or modem/surge protector) into a different
•
•
I hear other calls when using the telephone.
•
I hear noise on the cordless handset and the keys do not work.
•
Common cure for electronic equipment.
•
following (in the order listed):
SIP Phone System Administration Guide for details
r p
r p
r p
52 52 52
(refer to SIP Phone
(refer to SIP Phone System