VTech SIP Cordless Series Master User Manual page 43

Telephone operation
SIP classic 2-line - S1420
Volume
To adjust the listening volume:
•
•
To adjust the ringer volume of the telephone base:
When the telephone base is idle, press +/- VOLUME on it to adjust the ringer volume
Call waiting
When you hear a call waiting tone during a call, press FLASH on the telephone base to put your current call on hold and take the
Press FLASH
Mute
To mute the microphone:
a call, press MUTE
Press MUTE
Hold
To place a call on hold:
press HOLD
Conference call
To initiate a conference call:
Press HOLD
Once the second party is on the line, press CONF
To initiate a conference call while both calls are on hold:
Press CONF
To switch a conference call from the telephone base to the cordless handset:
•
•
To switch a conference call from the cordless handset to the telephone base:
•
•
To end a conference call:
•
• When the conference call is in speakerphone mode, press CONF or
• When the conference call is in handset earpiece mode, place the corded handset back in the telephone base to end
•
When there is
+/VOLUME/-
+/- VOLUME
/SPEAKER to release the call from hold, or the call will end automatically after the preset call on
/SPEAKER releases the call on line 1
/SPEAKER or CONF
HOLD on the telephone base and then press CONF on the
HOLD on the cordless handset and then press CONF on the
MUTE key illuminates when the mute function is
MUTE
e corresponding
/SPEAKER or CONF
/SPEAKER on the telephone base to end
40