Ers5600 Switch Configuration Example; Ers5600 Configuration - Avaya ERS 8600 Technical Configuration Manual

3. ERS5600 Switch Configuration Example

ERS5600-1
Mgmt IP = 47.133.58.56
For this configuration example, we will enable RADIUS user authentication on ERS500-1 using the switch
management port. We will configure the Identity Engines RADIUS server with the following two users:

User name with read-only access: 5600ro

User name with read-write access: 5600rw

3.1 ERS5600 Configuration

3.1.1 Enable RADIUS
Up to two RADIUS servers are supported on the ERS5600, 5500, 4500, or 2500 series switches. For this
configuration example we will simply configure one RADIUS server.
ERS5698-1 Step 1 – Add RADIUS server, enable RADIUS, and enable RADIUS accounting
5698TFD-1-PWR(config)# radius-server host 47.133.56.101 key Nortel
5698TFD-1-PWR(config)# radius accounting enable
5698TFD-1-PWR(config)# cli password telnet radius
If the switch is used in a stack, enter the following:
5698TFD-1-PWR(config)# cli password stack telnet radius
ERS5698-1 Step 1 – Optional, enabling password fallback
5698TFD-1-PWR(config)# radius-server password fallback
Switch User Authentication using Identity Engines Ignition Server Technical Configuration Guide
[July 2010
Core
Network
Identity Engines
Ignition Server
avaya.com
47.133.56.101
47