Verification - Avaya ERS 8600 Technical Configuration Manual

3.3 Verification

3.3.1 Verify User Authentication
You can test user authentication for the ERS5600 users configured on IDE by entering the user name
and password.
Step 1 – Via Ignition Dashboard, select the IP address of the Ignition Server, click on the
Troubleshoot tab, go to Directory Service Debugger and select the Process Request tab. You can
also simple test user authentication as we did for the ERS8600 via the Auth User tab. Enter a valid
user name and password configured for the ERS5600 and click on Send Request
Via Dashboard, verify the following information:
Option
Results
Switch User Authentication using Identity Engines Ignition Server Technical Configuration Guide
[July 2010
Verify
If successful, you should get several messages indicating the internal user
lookup and authentication was successful providing you entered the correct
user name and password.
avaya.com
68