7.2. Setting Up the Sensor Communication Unit
Set up the Sensor Communication Unit.
7.2.1.
Hardware Settings
Check the hardware switches on the Sensor Communication Unit.
Precautions for Correct Use
Make sure that the power supply is OFF when you perform the settings.
1
Make sure that the power supply
of the Sensor Communication
Unit is turned OFF.
*If the power supply is turned
ON, settings may not be
applicable as described in the
following procedure.
2
Mount the Sensor
Communication Unit and Sensor
Amplifier.
*For information on mounting
method, refer to 4-1-1 Mounting
Method in the E3X-ECT
EtherCAT Sensor
Communications Unit
Operation Manual (Cat. No.
E413).
7. Connection Procedure
10