Shure Incorporated
SCM800/E AUDIO CONNECTIONS FIGURE 5
OUTPUT LIMITER THRESHOLD SETTINGS
The DIP switches on the rearpanel, shown below in Figure 3, control the output limiter threshold settings. Switch
es 5 and 6 change the output limiter threshold to OFF (default setting), +16 dBm, +8 dBm, or +4 dBm. Other set
tings are as shown in the table at right. Refer to the Internal Modifications section of this manual for additional set
tings.
NOTE: Switches 1, 2, 3, 4 and 7 are inactive and are not used.
OUTPUT LIMITER THRESHOLD DIP SWITCH FIGURE 3
DIP SWITCH FUNCTIONS
6/15