Olivetti ECR 7700LD eco Plus SD User Manual page 42

ming Receipt Header / Footer
11.
r cash register prints a header and a footer on all
customer receipts and Management Reports.
By default, your cash
messages for header and footer. You can personalize
your header and footer by using the numeric keypad
and/or Character Table to enter the characters.
Receipt Header
You can choose to print your header in standard or
fiscal format programming the System Option #29.
See "System Options" for details.
Fiscal header is composed of following captions:
(1) SOCIETY:
(2) STREET NR:
(3) STREET NAME:
(4) POSTA CODE:
(5) CITY NAME:
S/N:
SIRET NR:
NAF NR:
TVA NR:
ECR VERSION:
where (1) - (5) can be set as follow:
PRG
Press repeatedly unitl the display shows the
message "SO1" indicating the first caption of the fiscal
header to be programmed (SOCIETY)
3 Enter the characters you wish to insert and then
confirm insertion pressing
4 Repeat steps 2 and 3 if you with to program other
header's captions.
SERIAL NR, SIRET NR, NAF NR, TVA NR captions
are set during initial phase of machine and SD
initialization. ECR VERSION caption is automatically
inserted by the machine.
Standard header consists in six lines of 24 characters
each where you can insert a personalized message.
PRG
Press repeatedly unitl the display shows the
message "HD1" indicating the first line of the
receipt's header.
3
repeatedly unitl the display shows the
header's line number you want to personalize.
4 Enter the characters you wish to insert and then
press
.
5 Repeat steps 3 and 4 if you wish to program the
remaining header's lines.
6 to exit.
10
register prints courtesy
.
Receipt Footer
You can program your cash register to print a courtesy
message at the end of every customer receipts and
Management Reports. Footer consists in 4 lines of 24
characters each where you can insert a personalized
message.
PRG
P re ss
repeatedly unitl the display shows the
message "FT1" indicating the first line of the receipt's
footer.
3 repeatedly unitl the display shows the
footer's line number you want to personalize.
4 Enter the characters you wish to insert and
press
.
5 Repeat steps 3 and 4 if you wish to program the
remaining footer's lines.
6 to exit.
Example: Change the third line of the default header to
PLEASE COME AGAIN using the Character Table.
Type/Press:
Switch to Recipt header
definition mode
P
L
S
C
A
E
I N
Confirm entered Exit
header
Receipt header line selection
E A
E
O M
G A
then