Table of Contents
Advertisement
Loewe bild
User handbook
TV
Volume / channels
TV
Via the menu item TV, which is selectable via the Home view, one
channel can be selected from the current channel list. By selecting a
channel you will arrive in the TV mode.
In the TV mode there are a number of functions, such as Teletext, PIP,
EPG available to you. Via the individual menu options you can select
additional options and settings surrounding the TV operation.
Setting the volume
Switching sound off/on
Sound off.
Sound on:
Press key again or increase the volume
using V+.
Setting the volume
V+/V– Volume up/down.
The volume indicator will be displayed in the center of
the screen.
The volume control bar can be deactivated in the
menu System settings
On-screen displays.
Select channel
Select channel with P+ / P–
When using Instant Channel Zapping, you can very quickly switch to other
channels. The instant channel zapping
in the background in order to pre-select the next channels. Due to this
pre-selection, you can now switch to this channel within a very short time.
While using the digital recorder DR+
recording, multi recording) or in PIP mode, Instant Channel Zapping
is not available. Switching is done at „normal" speed.
For encrypted channels Instant Channel Zapping is only possible to
a limited extent.
P+/P– Channel up/down.
The number and the name of the channel along with the
title of the programme and that of the next programme
will be briefly shown. Also, the status display with time/
date and programme-dependent symbols appears.
The symbols of the status display are described in
chapter TV, section Status display.
Select channel using the numerical keys
If you select an unoccupied channel position, the next available
channel is selected.
1-digit channels
Press the numerical key a little bit longer: The channel
long
will change immediately or press the numerical key
briefly, the channel changes after 2 seconds (changes
immediately if up to 9 channels are stored).
2-digit and 3-digit channels
Press first (and second) numerical key briefly. Keep the
last numerical key depressed a little bit longer: The
short short long
channel will change immediately or: press all the numer-
ical keys briefly, the channel changes two seconds after
the last number has been entered (with up to 99 or 999
saved channels it will change immediately).
4-digit channels
Press all four numerical keys briefly, the channel
changes immediately.
all short
(1
Availability varies by device type (see chapter Technical data - equipment features for your TV set).
36
Control
more ...
(1
technology uses the second tuner
(1
(timeshift operation, archive
Selecting a channel out of the channel list
In normal TV mode, without other displays:
OK Call channel list.
Mark channels.
OK The marked channel will be called.
Changing the channel list
In normal TV mode, without other displays:
OK Call channel list,
MENU: Call menu options.
Mark channel list selection.
OK Call.
Mark desired channel list.
OK Call.
The channel list is amended according to selection.
BACK: a long press: Close overlay.
Explanations of the channel lists:
The number and the names of the possible channel lists depend
on the available signal sources (antennas, TV reception networks,
etc.).
ASTRA LCN
Only channels from the selected source / reception
Analogue
network are indicated in the channel list.
DVB-C
DVB-T
Personal list Only channels of the selected personal list are indicated
in the channel list. The name of the list may be changed.
AV list Exclusively AV inputs are shown in the channel list.
Manage list Call up the channel list editing menu (System
settings
Channels
Channel lists TV).
Advertisement
Table of Contents
