External Connections; Transport Tube Installation - Follett Horizon Elite series Installation Instructions Manual

5.

External Connections

5.1

Transport tube installation

➍
➏
➐
Ice transport tube tips
§ Insulate entire length of ice transport tube
§ Secure ice transport tube
page.
§ Pitch ice transport tube at least 1/4" per foot (6,4mm/0.3m)
§ Ice transport tube must drain towards ice machine
Ice transport tube to dispenser
§ Be sure tube ends are square
§ Heat end of transport tube in cup of 160 F (71 C) hot water to soften and spread with pliers
connection to ease assembly
§ Push ice transport tube onto ice machine nipple
➐
§ Install hose clamp
Ice transport tube to Ice machine
§ Be sure tube ends are square
§ Heat end of transport tube in cup of 160 F (71 C) hot water to soften and spread with pliers
connection to ease assembly
§ Push ice transport tube onto ice machine nipple
➓
§ Install hose clamp
10
➌
1/4"
➊
➋
as needed to prevent dips and traps from forming. For long tube runs see next
➍
➏
➑
➒
Horizon Elite 710/1010/1410
➋
Hot Water
160 F (71 C)
➊
1'
➌
HARMONY • RIDE Technology
➎
➑
➒
➓
➎
before making
➎
before making