Table of Contents
Advertisement
Technical Specifications
ToughTek M680a CS Mortar Sprayer
Maximum Fluid Working Pressure
Maximum Air Inlet Pressure
Minimum Inlet Air Flow (Typical)
Minimum Inlet Air Flow (Pump Only)
Pressure Ratio (Fluid to Air)
Air Motor Piston Diameter
Stroke Length
Lower Output
Flow Rate at 30 cycles per minute
Flow Rate at 60 cycles per minute
Air Inlet Size
Fluid Inlet Size
Fluid Outlet Size
Weight (without fluid)
Sound Pressure
Sound Power
Dimensions
Height
Width
Depth (pump on cart only)
Depth (pump on cart with hopper)
Maximum pump speed
(Do not exceed the maximum recommended pump speed of fluid pump to prevent premature pump wear.)
Spraying
Flushing
Wetted Parts
Entire System
Pump
3A5275B
US
600 psi
100 psi
30 standard cubic feet per
minute
8 scfm per gallon at 100 psi 0.06 cubic meters per minute
7.5 in.
4.75 in.
41.9 cu. in. per cycle
5.44 gpm
10.88 gpm
3/4 npt(f) (Chicago fitting)
2 in. Cam Groove (male)
1.5 npt(f) with a 1.5 in. male Cam and Groove fitting
250 lb
Refer to applicable air motor and applicator manuals. See
Related Manuals, page 2.
44.5 in.
27.5 in.
32 in.
37 in.
40 cycles per minute (typically less than 10 cycles per min-
60-90 cycles per minute (only when pumping flushing fluid)
Stainless steel, UHMWPE, nylon, plated steel, anodized alu-
minum, FX-75
Stainless steel, carbide, PTFE, UHMWPE, solvent-resistant
o-rings, plated steel
Technical Specifications
Metric
4.1 MPa, 41bar
0.41 MPa, 4.1 bar
0.85 cubic meters per minute
per liter at 7 bar
10:1
191 mm
120 mm
686 cc per cycle
20.6 lpm
41.2 lpm
113 kg
113 cm
70 cm
81 cm
94 cm
ute)
35
Advertisement
Table of Contents
