Radio Shack PRO-95 Owner's Manual page 82

6417$.'5*116+0)
2TQDNGO
Scanner is
totally
inoperative.
Poor or no
reception.
The keypad
does not work.
The scanner is
on but will not
scan.
During
scanning, the
scanner locks
on frequencies
that have an
unclear
transmission.
82
2QUUKDNG"%CWUG
The AC or DC
adapter is not
connected.
Batteries have failed Recharge the
An antenna is not
connected or is
connected
incorrectly.
Programmed
frequencies are the
same as "birdie"
frequencies.
Keylock is turned on. Turn off keylock.
The scanner might
need to be reset or
initialized.
SQUELCH is not
correctly adjusted.
Only one channel or
no channels are
stored.
Programmed
frequencies are the
same as "birdie"
frequencies.
4GOGF[
Be sure the adapter's
barrel plug is fully
inserted into the PWR
DC 9V jack.
rechargeable batteries
or replace the stan-
dard batteries
Be sure an antenna is
properly connected to
the scanner.
Avoid programming
frequencies listed
under "Birdie
Frequencies" on
Page 69 or only listen
to them manually.
Turn the scanner off
then on again, or reset/
initialize the scanner
(see "Resetting/
Initializing the Scanner"
on Page 83).
Turn SQUELCH
clockwise.
Store frequencies into
more than one
channel.
Avoid programming
frequencies listed
under"Birdie
Frequencies" on
Page 69, or only listen
to them manually.