Radio Shack PRO-95 Owner's Manual page 51

When you turn it off,
" ". You cannot set the attenuator
.
while the scanner is scanning.
Press and then
FUNC
the attenuator to its global mode.
=beXWbý7JJ$ =beXWbý7JJ$ =beXWbý7JJ$ =beXWbý7JJ$
appears for 2 seconds
at the bottom line and
W W W W
appears. means the attenuator is
# # # #
on and means it is off. Press
to turn the attenuator on or off.
7JJed 7JJed 7JJ· 7JJ·
7JJed 7JJed 7JJ· 7JJ·
or
bottom line while scanning.
Press and then
FUNC
turn off the global attenuation
DehcWbý7JJ DehcWbý7JJ
DehcWbý7JJ DehcWbý7JJ
mode.
bottom line for about 2 seconds.
±
6 "
740+0)
1 " "1
0 #0&
Each time you press any of the
scanner's keys, the scanner
sounds a tone. To turn the
scanner's key tone off or on:
1. If the scanner is on, turn
VOLUME OFF/MAX
counterclockwise until it clicks
to turn the scanner off.
2. Turn
VOLUME OFF/MAX
clockwise to turn the scanner
M[bYec[ýJeý:kWbýJhkda_d] M[bYec[ýJeý:kWbýJhkda_d]
M[bYec[ýJeý:kWbýJhkda_d] M[bYec[ýJeý:kWbýJhkda_d]
on.
appears.
M[bYec[ýJeý:kWbýJhkda_d] M[bYec[ýJeý:kWbýJhkda_d]
M[bYec[ýJeý:kWbýJhkda_d] M[bYec[ýJeý:kWbýJhkda_d]
3. While
appears, press
the key tone or
7 "
5+0) 6*'
$
#%-.+)*6
You can turn on the display's
backlight for easy viewing in dimly
7 7 7 7
changes to
ATT
W W W W
or
appears on the
again to
ATT
appears on the
"- "6
6*' ';
((
to turn on
1
to turn it off.
2
"&
+52.#;
to set
# # # #
ATT
"
10'
If you turn on the
attenuator, the
scanner might not
receive weak signals.
"
± ±
"016'" "
51