Specification; Main Assembly - Axminster Bandsaw Original Instructions Manual

Code
Model
Rating
Power
Blade Speed
Blade Length
Blade Width Min/Max
Max Width of Cut
Max Depth of Cut
Max Width of Cut with Fence
Noise Level
Table Size
Table Height
Wheel Diameter
Dust Extraction Outlet
Overall L x W x H
Weight
Your bandsaw is 95% assembled in order to reduce the
footprint of the machine for packaging, several items are
dismounted from the machine and need to be re-affixed.
WARNING! THE BANDSAW IS A HEAVY PIECE
OF MACHINERY, WE STRONGLY ADVISE YOU GET
THE ASSISTANCE OF ANOTHER PERSON OR USE
SOME SORT OF LIFTING DEVICE, (HOIST, ENGINE
CRANE), BEFORE YOU ATTEMPT TO LIFT OR MOVE
THIS MACHINE!
Mounting the Table
The saw table can be fitted without removing the blade.
However, if you would feel more comfortable not having to
manoeuvre the table around the blade (the table is quite
heavy), remove the blade by opening the top and bottom
covers, release the tension on the blade by releasing the
Quick release tensioning lever (A), see fig 01-02-03.
Remove the protective rapping around the bandsaw
blade, see fig B. CAUTION! take care, the blade is sharp.
Lift the bandsaw off the pallet using the 'Eye Bolt Lifting Ring'
mounted to the top of the bandsaw. Place the saw on a flat
surface, ascertain the orientation of the machine and move it
to its desired position in the workshop. Ensure that the machine
is positioned to allow sufficient clearance all round to cater for
the maximum length of timber you wish to cut.
Eye bolt lifting ring
A
B
7

Specification

103472
AT3086B
Trade
1.5kW 230V 1ph
720m/min
3086.1mm
3-19mm
342mm without fence
356mm
315mm
85dB
552 x 410mm
940mm
355mm
100mm x 2
740 x 825 x 1,921mm
145kg

Main Assembly

Fig 01-02-03
Continues Over....