Table of Contents
Advertisement
Manually Configuring your Router
Setting WPA-PSK (no server)
1.
From the "Security Mode" drop-down menu, select "WPA-PSK
(no server)".
2.
For Encryption Technique, select "TKIP" or "AES". This setting will
have to be identical on the clients that you set up.
3.
Enter your Pre-Shared key. This can be from eight to 63 characters
and can be letters, numbers, or symbols. This same key must be
used on all of the clients that you set up. For example, your PSK
might be something like: "Smith family network key".
4.
Click "Apply Changes" to finish. You must now set all clients to
match these settings.
45
45
1
2
3
4
5
6
7
8
9
10
11
12
Advertisement
Table of Contents
