Please refer to the following changes in the CLIP MCW / CLIP T MCW installation instructions, Cat. # DE3594-, revision 3 only
2. SPECIFICATIONS
Compliance with standards:
Europe: EN 300220, EN 301489, EN 60950, EN 50131-2-2 Grade 2 Class II
USA: @ 315 MHz complies with CFR 47 part 15 (FCC)
Canada: RSS210
3. INSTALLATION
3.2 Regular Mounting
RANGE
SELECT
JUMPER
FRONT
TAMPER
SWITCH
LED
ON/OFF
JUMPER
RF
MODULE
Figure 7. Internal View
3.3 Bracket Mounting
D-303643
CLIP MCW / CLIP T MCW
INSTALLATION INSTRUCTIONS ADDENDUM
3 VOLT
LITHIUM
BATTERY
BACK
TAMPER
SWITCH
(OPTIONAL)
SENSOR
LEDS
Figure 11. Mounting Bracket to Surface
.
1