Select Base; Remove Handset; Remove Base - Grundig GDT 400 User Manual

24
BASE SETTING
Note:
1.
If the handset is registered to the base. Cordless handset number will be
shown after it returns to idle mode.
2. If the cordless handset is failed to register to the base, register the handset
again.
3. Up to 6 cordless handsets can be registered to one base

Select Base

This option allows user to select a base.
1.
Press » « key.
2.
Press »+« or »–« key to select "REGISTRATION" and press »
3.
Press »+« or »–« key to select "SELECT BASE" and press »
»+« or »–« key to select a specific base.
4.
Press » « key to comfirm the setting.

Remove Handset

This option allows user to remove the registered cordless handset from the
base.
1.
Press » « key.
2.
Press »+« or »–« key to select "REGISTRATION" and press »
3.
Press »+« or »–« key to select "REMOVE HANDSET" and press »
key.
4.
Input the PIN code and press »
5.
Press »+« or »–« key to select the cordless handset you want to remove and
press » «
Note:
The LCD of the removed handset will show "SEARCHING".

Remove Base

This option allows user to remove the registered cordless handset from the
base.
1.
Press » « key.
2.
Press »+« or »–« key to select "REGISTRATION" and press »
3.
Press »+« or »–« key to select "REMOVE BASE" and press »
4.
Input the correct PIN code and press »
5.
Press »+« or »–« key to select the base you want to remove and press
» « key. The LCD will display "INPUT PIN".
6.
Input the correct PIN code and press »
7.
Press » « key to confirm.
key.
« key.
« key.
« key.
« key.
« key, Press
« key.
«
« key.
« key,