Getting Started Install And Charge The Batteries - Grundig GDT 400 User Manual

6
BATTERY SAFETY PRECAUTIONS
Insert two pieces AAA batteries in the compartment, ensuring
correct polarity and close the compartment.
• Please wait for 30 seconds after removing the old bat-
• Place the handset in the base station to charge for 16 hours
• Use only with provided batteries.
Warning:
• The handset does not work and damaged if the wrong batteries are
inserted.
• Risk of explosion if battery is replaced by an incorrect type.
• Dispose of used batteries according to the instruction
If batteries are empty, handset LCD will not has any display and the
handset will not response to any key. Handset is then required to put
back on Base Station / Charger cradle to charge. Handset cannot be
used until handset name and aerial icon appear. If handset does not
charged full before use, handset may emit battery low alert tone and
battery level indicator shows empty.
Getting Started
Install and Charge the Batteries
teries when change and install a new pair battery.
prior for first use. If you don't properly charge the phone,
battery performance will be compromised.