Vmwi; Set Default; Handset And Base Station Registration; Base Station - Grundig GDT 400 User Manual

BASE SETTING

VMWI

If you have subscribed to a voice messaging service, the LCD will display
"MESSAGE WAITING" and flash to alert you that you have received
new message.
To turn Visual Message Waiting Indication (VMWI) off
1.
Press » « key.
2.
Press »+« or »–« key to select "BS SETTINGS" and press »
3. "INPUT PIN" will be shown, Input the correct PIN code and press
» « key.
4.
Press »+« or »–« key to select "VMWI" and press »
OFF" will display.
5.
Press » « key to confirm the setting.
Note:
VMWI service requires a subscription through your local service pro-
vider.

Set Default

This option allows user to restore the base to the default setting.
1.
Press » « key.
2.
Press »+« or »–« key to select "BS SETTINGS " and press »
3. "INPUT PIN" will be shown, Input the correct PIN code and press
» « key.
4.
Press »+« or »–« key to select "SET DEFAULT" and press »
LCD will display "CONFIRM".
5.
Press » « key to confirm the setting.

Handset and Base Station Registration

1.
Press » « key.
2.
Press »+« or »–« key to select "REGISTRATION" and press
key.
3.
Press »+« or »–« key to select "REGISTER" and press »
4. The LCD will display "INPUT PIN".
5.
Input the correct PIN code and press »
cordless handset, the LCD will blink "REGISTRATION".

Base station

Press and hold the »
and in-use LED flashes.
« key for about 15 seconds until long beep sound
« key. "VMWI
« key, the
»
« key,
« key to begin to register the
« key.
« key.
«
23