Ford Ranger 2019 Owner's Manual page 302

Note: If the spare wheel is different in size
or construction to the road wheels, replace
it as soon as possible.
Stowing the Flat Tire
Note: Do not use power tools on the spare
wheel winch input drive.
1. Place the wheel flat on the ground,
with the outer face of the wheel facing
up.
2. Tilt the bracket, and pass it through the
center of the wheel.
E283905
3. Place the jack on the foam block and
pull the top of the jack up, to align the
jack load rest hole with the hole of the
floor bracket.
4. Insert the wing bolt and tighten the
wing bolt by hand.
5. Install the cover.
Ranger (TFG) Canada/United States of America, enUSA, Edition date: 201809, First-Printing
Wheels and Tires
3. Fully insert the jack handle into the
4. Stow the wheel brace, jack, and jack
Stowing the Vehicle Jack and Tool
Kit - SuperCab
1.
2. Install the tool kit in the bin.
Stowing the Vehicle Jack -
SuperCrew
1.
299
guide hole and turn the jack handle
clockwise until the tire raises to its
stowed position underneath your
vehicle and securely seated.
handle away.
Before bringing the jack back into the
vehicle, rotate the lead screw of the
jack counterclockwise to collapse the
jack height. Do not fully tighten.
Before bringing the jack back into the
vehicle, rotate the lead screw of the
jack counterclockwise to collapse the
jack height. Ensure that jack is not fully
closed.