Ford Ranger 2019 Owner's Manual page 202

Speed
62 mph
(100 km/h)
62 mph
(100 km/h)
62 mph
(100 km/h)
Adjusting Pre-Collision Assist Settings
You can adjust alert and distance alert
sensitivity to one of three possible settings
by using the information display control.
See General Information (page 87).
You can switch the distance alert and
indication function off using the
information display controls. See General
Information (page 87).
If required, you can switch active braking
off using the information display controls.
See General Information (page 87).
Note: Active braking automatically turns
on every time you switch the ignition on.
Ranger (TFG) Canada/United States of America, enUSA, Edition date: 201809, First-Printing
Driving Aids
Sensitivity Graphics
Normal
Normal
Normal
Distance Gap
Grey >82 ft (25 m)
56–82 ft
Yellow
(17–25 m)
Red <56 ft (17 m)
Blocked Sensors
E271779
If a message regarding a blocked sensor
or camera appears in the information
display, the radar signals or camera images
are obstructed. The radar sensor is located
behind a fascia cover near the driver side
of the lower grille. With an obstructed
radar, the Pre-Collision Assist system does
not function and cannot detect a vehicle
ahead. With the front camera obstructed,
199
Time Gap
>0.9sec
0.6sec - 0.9sec
<0.6sec