Omron V680 Series User Manual page 94

Section 4
Installation
V680-D1KP58HTN
RF Tag Installation Direction
The RF Tags have a limited life span. Therefore, install them in locations in which they can be easily
replaced. Use the following procedure to mount the V680-A80 Attachment when required.
1.
Mount the Attachment to the workpiece.
2.
Tighten the lock nut.
Use a tightening torque of 21 to 42 N·m.
3.
Mount the RF Tag to the Attachment.
The RF Tag can be mounted in either
direction.
Insert the split pin into the 3.2-dia. hole and open the tip of the pin to secure.
Two nuts and one split pin are provided with the V680-A80 Attachment. Replacement split pins must be
provided by the user.
RFID System
92
User's Manual
M12
Mounting Hole Dimensions
Split pin
Nominal: 3.2 mm × 20 mm (length)