Omron V680 Series User Manual page 43

Heat Resistance
Storing RF Tags under high temperatures or heat cycle will adversely affect the performance of the
internal parts and the service life of the RF Tags.
Correct operation has been confirmed through the OMRON in-house evaluation for RF Tags under the
following high-temperature conditions.
1) 2,000 cycles, where 1 cycle is each 30-minute at Room temperature and 200°C
2) 250°C, 500 hours
The controller's setting
Please set the latest ID controller to the CA1D mode and use it when the latest ID controller is used
together with the old model ID controller Model V680-CA1D/-CA2D.
RF Tag
Controller
V680-CA1D/-CA2D only
C680-CA1D/-CA2D and the latest
ID controller used together
The latest ID controller only
Note: The latest ID controller:
V680-CA5D01-V2/-CA5D02-V2
V680-CH1D/CHUD/-CH1D-PSI
CS1W-V680C11/-V680C12
CJ1W-V680C11/-V680C12
V680-D1KP58HT and V680-
V680-D1KP58HT only
D1KP58HTN used together
Not required Not required
Not required Set the latest ID controller to
the CA1D mode.
Not required Not required
Section 2
Specifications and Performance
V680-D1KP58HTN only
Not required
Set the latest ID controller to
the CA1D mode.
Not required
RFID System
41
User's Manual