Omron V680 Series User Manual page 76

Section 4
Installation
Amplifier Cable Bending Radius
Attaching/Removing Amplifire and Antenna Connectors
Attaching the Connector
1.
Hold the Antenna connector, align the key,
and insert the connector into the Amplifier
connector.
Key
Removing the Connector
1.
Turn the connector counterclockwise to
release the lock.
The connector will not come out unless the lock is first released by turning the connector. To remove the cable, release
the lock and pull on the connector. Pulling the cable without releasing the lock may break or damage the cable.
Do not pull the Antenna connector over the power of 30 N.
The Antenna connector may be broken.
RFID System
74
User's Manual
Antenna connector
Do not bend the cable past a bending radius of 35 mm.
2.
Turn the connector clockwise to lock it in place.
2.
Pull the Antenna connector straight out.
Antenna connector