SMC Networks EZ Connect N SMCWUSBS-N4 User Manual page 24

WPA/WPA2 Passphrase: Wi-Fi Protected Access Passphrase
◆
802.1x: Enables 802.1X security.
◆
◆ Pre-Shared Key (Static WEP): Enables the use of shared keys that
are defined on both the access point and the station. To define shared
encryption keys, choose the Shared Key radio button and click
Configure to fill in the Define Shared Keys window (shown in
on page 24).
None: No security (not recommended).
◆
If the access point to which the adapter is associated has WEP set
N :
OTE
and the client has WEP enabled, make sure that "Allow Association to
Mixed Cells" is checked on the Security tab to allow association. To
complete WEP encryption configuration, you must select the 802.11
Authentication Mode as appropriate on the Advanced tab of this Profile
Management dialog.
To configure the Encryption Keys under the Pre-Shared keys (Static WEP)
Security mode:
Figure 15: Profile Tab - Security (Static WEP)
When you select different security options, the configuration is
N :
OTE
different, you can then configure the exact keys as needed.
– 24 –
| Configuration Guide
C 3
HAPTER
Profile Management
Figure 15