Firmware Update - D-Link AC1200 User Manual

Section 4 - Configuration
The Firmware Update page allows you to upgrade firmware manually or you
can configure the router to check for updates automatically.
Do not turn off the router before the firmware upgrade is completed. This may
cause the device to break down.
Local Update
Choose File: Click to select firmware file to update.
Click on Update Firmware when ready.
Remote Update
Remote Server Specify server address from which to update firmware.
URL:
Enable/Disable:
Toggle this switch to check for updates automatically.
Click on CHECK FOR UPDATES to check for the latest firmware
available from the remote server.
Click on APPLY SETTINGS when finished.
D-Link DIR-1210 User Manual

Firmware Update

119