D-Link AC1200 User Manual page 35

Section 4 - Configuration
Select Dynamic IPv6 to obtain IPv6 address information automatically
from your Internet Service Provider (ISP). Choose Basic configuration or All
Settings.
Basic
MAC address: The default MAC address is set to the Internet port's physical interface
MAC address on the router. You can edit that address manually here.
Clone MAC Toggle this switch to clone the MAC address of the device you are
address of your
using to access the web UI. Note that no two MAC address within the
NIC:
same subnet can be the same.
Restore Default Click here to restore your router's default MAC address.
MAC Address:
Get IPv6: Choose Automatically, IPv6 by DHCPv6, by SLAAC,
or DHCPv6 PD according to the type of IPv6 is used
by your ISP. The default setting is Automatically.
Click Apply when you are done.
D-Link DIR-1210 User Manual
Dynamic IPv6
31