Client - D-Link AC1200 User Manual

Section 4 - Configuration
Client mode allows you to configure your router as a client on another wireless
network. This would be useful to setup the router as a wireless repeater or
connect to a WISP.
Enable: Toggle this switch to enable your router to act as a Wi-Fi client.
Broadcast wireless Toggle these switches to enable or disable your router's wireless APs.
network 2.4/5
GHz:
Choose Select network from list or Connect to hidden network.
Connecting to
network: If you choose Select network from list, select the network you
wish to connect to and enter any necessary security information as
prompted. If you choose Connect to hidden network, enter the
Wi-Fi information below.
D-Link DIR-1210 User Manual

Client

85