Dns - D-Link AC1200 User Manual

Section 4 - Configuration
Domain Name System (DNS) servers convert URLs into IP addresses to make
it easier to navigate the internet. This screen allows you to manually configure
DNS servers if required by your ISP or if a custom configuration is needed
DNS IPv4/IPv6
Manual: Enable this to specify name servers manually under Name Server
IPv4/IPv6.
Default Gateway: If the Manual switch is set to disabled, apply below Interface setting
as default.
Interface: Select the interface to which your DNS settings will apply.
Name Severs IPv4/IPv6
If Manual is set as enabled, specify one or more IP addresses for DNS
IP address:
name servers.
If the Manual switch is set as disabled, apply below Interface setting
Default Gateway:
as default.
Add Server: Click here to add an additional server.
Hosts
Add: Click Add to add a manual entry for DNS resolution. Refer to Add
Hosts on page 63 for more information.
D-Link DIR-1210 User Manual

DNS

62