Waypoint Navigation (Fta-750 Only); Entering The Navigation (Navi) Mode - Yaesu FTA-750 Operating Manual

The navigation feature of the FTA-750 is presented in a
compass that helps you to figure out the destination and
your traveling direction at a glance.
The destination can be selected from the database of
airports and VOR stations, memory channels, and the
list of points you have selected previously, or directly
specified.
Notes:
 Be sure that the internal GPS unit has been activated
before using the navigation.
 The navigation does not work when insufficient
number of GPS satellites are captured to obtain your
position.

Entering the Navigation (NAVI) Mode

 Select "NAVI" on the
MENU screen by press-
i n g t h e [ ◄ ] o r [ ► ]
key, and then press the
[ ENT ] key.
FTA-750/FTA-550 O
W n
aypoInt aVIgatIon
M
perATing AnuAl
(Fta-750 o )
nly
The compass screen including the destination you
have selected last time will be displayed if you did
not reach there before switching the operation mode
or turning off the radio.
BUSY
133.800
KLAX-ATIS
VOL


 Course indicator
 Destination indicator
 Tag name of the destination
 DST (distance)
 COG (course over ground)
 SOG (speed over ground)
FCC ID: K6650013X20
IC: 511B-50013X20

KLAX
DST

km
10
COG
T 
360 °
SOG
kph

360
59
YAESU MUSEN CO., LTD.